Proof Coil Chain Grade 30


All chains manufactured to NACM 90 and or ASTM 80 Specifications. Tested and certified.


PROOF COIL CHAIN - Self colored, zinc plated, hot galvanized

SIZE WORKING LOAD LIMIT IN POUNDS FEET PER DRUM FEET PER 1/2 DRUM FEET PER PAIL MINIMUM WEIGHT PER FOOT
1/8 375 1, 500 - 0.17
3/16 750 1,500 760 250 0.33
1/4 1,250 800 400 141 0.63
5/16 1,900 550 275 92 0.93
3/8 2,650 400 200 63 1.41
1/2 4,500 200 100 35 2.4
5/8 6,900 150 75 - 3.58
3/4 9,750 100 50 - 5.48
7/8 11,375 75 35 - 7.31
1 13.95 60 30 - 9.41


6 X 25 STAINLESS STEEL WIRE ROPE*

FEET PER DRUM ESI PART #’S (FULL DRUM)
SELF COLORED ZINC PLATED HOT GALVANIZED
1, - - 18HG28
1,500 316SC28 316EG28 316HG28
800 14SC28 14EG28 14HG28
550 516SC28 516EG28 516HG28
400 38SC28 38EG28 38HG28
200 12SC28 12EG28 12HG28
150 58SC28 58EG28 58HG28
100 34SC28 34EG28 34HG28
75 78SC28 78EG28 78HG28
60 1SC28 1EG28 1HG28
FEET PER 1/2 DRUM ESI PART #’S (HALF DRUM)
SELF COLORED ZINC PLATED HOT GALVANIZED
500 - - 18HG28
760 316SC28 316EG28 316HG28
400 14SC28 14EG28 14HG28
275 516SC28 516EG28 516HG28
200 - 38EG28 38HG28
100 - 12EG28 12HG28
75 - 58EG28 -
50 - 34EG28 -
35 - 78EG28 -
30 - 1EG28 -


6X19 FIBER CORE IPS (CHINESE)
SIZE WORKING LOAD LIMIT IN POUNDS FEET PER DRUM FEET PER 1/2 DRUM MINIMUM WEIGHT PROOF ESI PART # ‘s
SELF COLORED HOT GALVANIZED SELF COLORED HALF DRUMS
1/4 2,600 800 400 0.63 14SC43 14HG43 14SC43
5/16 3,900 550 275 0.93 516SC43 516HG43 5116SC43
3/8 5,400 400 200 1.41 38SC43 38HG34 38SC43
1/2 9,200 200 100 2.4 12SC43 38HG34 -
5/8 13, 150 75 3.58 58SC43 58HG43 -
3/4 20,200 100 50 5.48 34SC43 34HG43 -

Note: these figures are for comparison purposes only. Please refer to the charts for exact figures.


PROOF COIL CHAIN
- Self colored, zinc plated, hot galvanized


LONG LINK CHAIN – Galvanized
SIZE WORKING LOAD LIMIT IN POUNDS FEET PER DRUM IN INCHES INSIDE LENGTH IN INCHES INSIDE WIDTH MIN. WEIGHT PER FOOT IN POUNDS ESI PART # ‘s
1/2 4,500 200 3.50 0.798 2.22 12HG28LL
5/8 6,900 150 3.75 1.00 3.41 58HG28LL
3/4 9,500 100 3.75 1.125 4.20 34HG25LL

Note: these figures are for comparison purposes only. Please refer to the charts on page for exact figures.

CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT OF CHAIN. NEVER USE PROOF COIL CHAIN
FOR OVERHEAD LIFTING OR WHERE ITS FAILURE WILL CAUSE DAMAGE TO PROPERTY OR LIFE.

PROOF COIL CHAIN GRADE 30
SIZE IN INCHES WORKING LOAD LIMIT IN POUNDS FEET PER DRUM FEET PER 1/2 DRUM MINIMUM WEIGHT PER FOOT
1/8 400 —- 1, .17
3/16 800 1500 750 .33
1/4 1,300 800 400 .63
5/16 1,900 550 275 .93
3/8 2,650 400 200 1.41
1/2 4,500 200 100 2.40
5/8 6,900 150 75 3.58
3/4 10,600 100 50 5.48
7/8 12,800 75 35 7.31
1 17,900 60 30 9.41
PROOF COIL CHAIN GRADE 30 – DEALER PAILS
SIZE IN INCHES WORKING LOAD LIMIT IN POUNDS FEET PER PAIL, APPROX.
3/16 800 250
1/4 1,300 141
5/16 1,900 92
3/8 2,650 63
1/2 4,500 32
LONG LINK CHAIN GRADE 30 – LONG LINK CHAIN
SIZE IN INCHES WORKING LOAD LIMIT IN POUNDS FEET PER DRUM IN INCHES INSIDE LENGTH IN INCHES INSIDE WIDTH MIN. WEIGHT PER FOOT IN POUNDS
1/2 4,500 200 3.50 .798 2.22
5/8 6,900 150 3.75 1.00 3.41
3/4 9,500 100 3.75 1.125 4.20

All chains manufactured to NACM 90 and or ASTM 80 Specifications. Tested and certified.
Half drums and dealter pails available in zinc plated and hot galvanized. Also available in ASTM Specification.
Upon request, NACM 96 available.

CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT OF CHAIN. NEVER USE PROOF COIL CHAIN FOR OVERHEAD LIFTING OR WHERE ITS FAILURE WILL CAUSE DAMAGE TO PROPERTY OR LIFE.
WARNING: Read important warnings and safety information.


View this Chain Now at Elite Sales


Call (877) 833-0131 to Speak with ESI
Buy Wholesale Chain

High Test Chain Grade 43


All chains manufactured to NACM 90 and or ASTM 80 Specifications. Tested and certified.


PROOF COIL CHAIN - Self colored, zinc plated, hot galvanized


6X19 FIBER CORE IPS (CHINESE)
SIZE WORKING LOAD LIMIT IN POUNDS FEET PER DRUM FEET PER 1/2 DRUM MINIMUM WEIGHT PROOF ESI PART # ‘s
SELF COLORED HOT GALVANIZED SELF COLORED HALF DRUMS
1/4 2,600 800 400 0.63 14SC43 14HG43 14SC43
5/16 3,900 550 275 0.93 516SC43 516HG43 5116SC43
3/8 5,400 400 200 1.41 38SC43 38HG34 38SC43
1/2 9,200 200 100 2.4 12SC43 38HG34 -
5/8 13, 150 75 3.58 58SC43 58HG43 -
3/4 20,200 100 50 5.48 34SC43 34HG43 -

Note: these figures are for comparison purposes only. Please refer to the charts for exact figures.


HIGH TEST BOOMER CHAIN (GRADE 43)
High Test chain with grab hook each end.

WIRE ROPE DIAMETER IN INCHES LENGTH IN INCHES WORKING LOAD LIMIT IN POUNDS GRADE NO. OF LINKS APPROX. WEIGHT EACH IN POUNDS ESI PART #’S
3/8″ 18 5,400 High Test 13 5 38X18G43TC

TAIL CHAIN (WINCH LINE END CHAIN) – Use same size chain
Clevis grab hook and pear shaped link one on end.

CAUTION: NEVER EXCEED THE WORKING LOAD LIMIT OF CHAIN. NEVER USE PROOF COIL CHAIN
FOR OVERHEAD LIFTING OR WHERE ITS FAILURE WILL CAUSE DAMAGE TO PROPERTY OR LIFE.

Self Colored or Hot Galvanized.

HIGH TEST CHAIN – GRADE 43
SIZE IN INCHES WORKING LOAD LIMIT IN POUNDS FEET PER DRUM FEET PER 1/2 DRUM MINIMUM WEIGHT PER FOOT
1/4 2,600 800 400 .63
5/16 3,900 550 275 .93
3/8 5,400 400 200 1.41
1/2 9,200 200 100 2.40
5/8 13, 150 75 3.58
3/8 20,200 100 50 5.48

HIGH TEST BOOMER CHAIN – GRADE 43 (GRAB HOOK BOTH ENDS)
SIZE WORKING LOAD LIMIT IN POUNDS APPROX. WEIGHT EACH IN POUNDS
1/4″ x 20ft. 2,600 13.5
5/16″ x 20ft. 3,900 20.0
3/8″ x 20ft. 5,400 30.5


View this Chain Now at Elite Sales


Call (877) 833-0131 to Speak with ESI
Buy Wholesale Chain

G 4 Windlass Chain

G-4 WINDLASS CHAIN – Hot dipped galvanized and stainless steel type 316, stamped "G4" on links.

This is a high tensile (Grade 43) chain especially calibrated for use on chain windlass.

SIZE OUTSIDE LENGTH OUTSIDE WIDTH INSIDE LENGTH INSIDE WIDTH
1/4 1.39 0.96 0.84 0.41
5/16 1.69 1.16 1.03 0.50
3/8 2.00 1.39 1.22 0.60
1/2 2.61 1.59 1.59 .0.77
5/8 3.21 1.79 1.79 0.91

 


HOT DIPPED GALVANIZED

CHAIN SIZE WORKING LOAD LIMIT WEIGHT PER FOOT IN POUNDS ESI PART # ‘s
1/4 2,600 0.73 14BBB40
5/16 5,900 1.1 516BBB40
3/8 8,100 1.6 38BBB40
1/2 1,800 2.69 12BBB40
5/8 19,500 3.79 58BBB40

 


STAINLESS STEEL, TYPE 316
CHAIN SIZE WORKING LOAD LIMIT WEIGHT PER FOOT IN POUNDS ESI PART # ‘s
1/4 2, 0.85 14SSG40
5/16 2,400 0.94 516SSG40
3/8 3,750 1.6 38SSG40
1/2 6,500 2.74 12SSG40
5/8 - - 58SSG40


View this Chain Now at Elite Sales


Call (877) 833-0131 to Speak with ESI
Buy Wholesale Chain

Blue Alloy Chain Grade 100

Blue Alloy Chain Grade 100 - 9/32 Blue Alloy Chain Grade 100 - 5/16 Blue Alloy Chain Grade 100 - 3/8 Blue Alloy Chain Grade 100 - 1/2
9/32″ 5/16″ 3/8″ 1/2″
Blue Alloy Chain Grade 100
BLUE POWDER COATED ALLOY CHAIN – GRADE 100
SIZE IN INCHES WORKING LOAD LIMIT IN POUNDS FEET PER DRUM MINIMUM WEIGHT PER FOOT IN POUNDS
9/32 4,300 500 .75
5/16 5,700 500 1.13
3/8 8,800 400 1.48
1/2 15, 200 2.49

Blue Powder Coated Grade 100 Chain is heat treated with high strength chain that offers some advantages
just like grade 80 chain. It works faster and better while giving 25 extra working load limit. Suppose, if you
were using Grade 80 for the work load limit of 12, pounds, then Blue Powder Coated Grade 100 Chain
has been known for working load limit of 15, pounds. You can use it along with smaller other chains
that will make the work load simpler. Such type of product is known for abrasion resistance and comes with
the extended lifestyle. However, the chain needs 20 elongation for better work. It is known for the ability
to stretch down in the proper way, without the fear of getting broken down.

Features

  • Distinctive blue powder coat finish
  • Tempered alloy steel
  • It is pull tested to 2 1/2 times working load limit
  • Minimum elongation of 20
  • Fully hardened
  • Links embossed with grade
  • You also get the traceability code
  • Advantages of Using the Product

    Bending Resistance
    Such type of chain comes with 38 higher power of resistance as compared to the regular round-link
    chains of the same diameter. It offers good support and can withstand bending forces as compared to
    round-link chains

    Higher Design Factor
    The design is same as that of other grade chain products, but it comes with better workload factor and
    offers a design factor of 6:1 compared to G80.

    Color-Coated Corrosion Protection
    Due to the blue color powder coated finishing, it offers corrosion protection and is easy identifying.
    The product is recommended for overhead lifting and binder chain facility. However, you can use it, for
    other purposes, as well.

    Alternate Finishes

  • Shot blast
  • Galvanized
  • Self colored
  • Painted gray

    Technical Specifications

  • Hardness approx. 41 HRC
  • Nominal proof stress* 600N/mm2
  • Nominal breaking stress* 1200 N/mm2

  • View this Chain Now at Elite Sales


    Call (877) 833-0131 to Speak with ESI
    Buy Wholesale Chain

    Call (877) 833-0131 to Speak with ESI
    Buy Chain, Rigging Hardware and Strand
    Copyright © 2014 Galvanized Chains - Buy Discount Galvanized Chains – Call (866) 520-8533.